It is metal sections made for the elevator shaft where multiple elevators will run in a shaft a single pillar is used to divide the elevator shafts. The reason it has a single post is that the back wall is load-bearing and can be attached directly with wall brackets.
Product code: KA-10-02
The system consists of posts, adjustable horizontal units, wall angles, bolts and anchors. The duct separator section assemblies are designed to be able to attach the elevator rail guide fastening and clip every one and a half meters.
The guide fasteners and rail guide clip can be mounted on both sides without welding, with a bolted connection to sweep the full distance from the horizontal beam.
The elevator shaft compartment set is used in elevator shafts with a depth of 1300 to 1800 mm. the shaft separator bulkhead and profile assemblies are assembled with bolted connections and contain no weldings.
Characteristics of the elevator shaft separator
- Used to separate wells from 1800 to 3000 mm
- With bolt connection and without welding
- Wall angles brackets, horizontal metal upright beam, beams, bolts and anchors are included in the kit.